**As to FRP (white / black) products
Many products are made by dividing production molds (molds necessary for manufacturing products) into separate sections, and resin burrs are unavoidably generated along the dividing lines of the production molds in the manufacturing process.
When the product is subjected to secondary processing, it is necessary to shave off the resin burrs, and because of this process, the gelcoat of the processed part may be shaved off at the same time.
FRP products have such processing marks, but A-TECH develops and sells them on the premise of painting, so they are not defective.
*The above information does not apply to painted (PT), wet, and dry carbon FRP products.
*A-Tech has not yet confirmed whether or not exhausts from other manufacturers (other than stock) can be installed or whether or not additional work is required, so they provide the unmodified products to customers.
*[Yoshimura] Slip-On ALPHA Cyclone can be installed on the under cowl SPL without any modification.
*If the product interferes with the exhaust, please modify it by yourself.
*Retighten the bolts periodically before and after running.
*Due to the characteristics of FRP and carbon products, the bolt hole positions may shift due to shrinkage.In this case, correct the position of the hole with a file or the like before installation.
*Tightening the bolts too tightly may result in damage or distortion.
*Tighten all the bolts temporarily and then tighten them completely.
*The image includes other types.
*No cancellations, returns, or exchanges after an order has been placed.
*There may be changes in product specifications due to the manufacturer’s reasons.
.
* The image is only for reference. The image shown may differ from the actual product.
It is compatible with the stock exhaust and can be used with the side stand.
