Color: black gel coat
Material: FRP
For vehicles equipped with G-Craft sub frame
Components: Exclusive bracket set, Mounting bolt set, Grommet set

**A painting is required separately.
*Please note that some modification may be required depending on the specifications of the vehicle and the exhaust.
The installation image shows the carbon type.
*There may be changes in product specifications due to the manufacturer’s reasons.
.

This under cowl is specially designed for MONKEY G-Craft sub frame.
For any vehicles that have bolt holes on both sides of the cylinder, it can be installed by bolt-on with the attached bracket!
(The special bracket is set to the height of the vehicle when 10-inch wheels are installed.)
Grommet collars are used on the cowl unit to increase vibration resistance!
The oil drain on the bottom of the cowl eliminates carburetor overflow and water pooling when washing the vehicle.
The oil catch function at the time of engine blow has been greatly improved from the conventional under cowl TYPE-1 and TYPE-2.

installation requirement
There must be bolt holes on both sides of the cylinder.
This product cannot be installed with stock exhaust or high type exhaust.
Because the bracket is attached from the bolt holes on both sides of the cylinder, it is necessary to have a cylinder with bolt holes, and if you do not have a cylinder with bolt holes, you will need to make your own special bracket.
Please note that some modification may be required depending on the specifications of the vehicle and the exhaust.

Installation method
As to installation, the rear bracket (Bracket 1) is tightened with the M8 hole on the bottom of the subframe, and the front bracket (Bracket 2) is attached using the M6 holes on both sides of the cylinder.
Installation manuals are enclosed in the package.