Material: Made of FRP
Specifications: Black gel finish (bare metal), unpainted
Applicable exhaust: Stock / 4 inch / 4.5 inch Round Muffler
Components: Tail lamp(winker built-in),Tail lamp dimming module,License plate light,Mounting bolt
**There may be changes in product specifications due to the manufacturer’s reasons.
*Some Ultra seats may require a little shaving on the back.
*Compatible muffler:(Mufflers other than stock/4″/4.5″ round mufflers require modification of the muffler clearance on the fender side.
*In case you want to install HD genuine tour pack and see-sie, detachable kit (sold separately) is required.
*The factory detachable kit cannot be used.Detachable Kit for Tourpack DV-3044-TOR
*The tail lamp attached to this rear fender is the newly designed side blinker (red tail) specification.
*The conventional tail lamp blinks at the bottom 7cm as a blinker, but the newly designed tail lamp blinks at the whole side for better visibility.
*The image shows the rear fender for ’14 and later.
*Installation of genuine (Japanese specification) and original Device tribar lights on the rear fender.
*Device’s original tribber lights can be replaced to work together with the tail lights to illuminate the small lights and brake lights.
*Wiring modification is required.
*There is no problem under the Road Traffic Law that the brake light shines in conjunction with the brake light.
*If the small light of the triver light is shined, it will be incompatible with the vehicle inspection.DV-3044-TRI Triver Light
*Wiring modification is required to install the tail lamp, license plate light and tribar light.
*By using the harness kit (sold separately), it can be installed by coupler-in.
*You will need a Load Equalizer III.(When HD stock blinker is bulb)
*This product is made of FRP.This is an unpainted product with a black gel finish (bare metal).
*Please make sure to check the installation on the vehicle before painting.Check the installation by tightening the bolts and nuts.
*It is recommended to use a professional painter who is knowledgeable about painting.We do not accept returns or exchanges after painting or processing.
*For the convenience of production, a split type mold is used, and burrs may appear on the side of the mold.Please prepare the surface before painting.
*Custom parts are mainly focused on improving the appearance.Please install the product at your own risk with the understanding that it may reduce the original performance of the vehicle.
*In developing and commercializing our products, we have conducted installation and driving tests, but there is a possibility that problems may occur even when the products are installed in vehicles that are considered to be compatible.
*In no event shall any claim be made due to installation.
*Please explain the above characteristics of custom parts to your customers before recommending them to us..
Bagger Rear Fender 97-08 Touring Model Narrow Tail Tribber Light Specs.
Fits round mufflers up to 4.5″.
A new tribber light version is available for models up to 2008.
Compared to the previous model, the number plate position has been lowered, and the newly designed tail lamp (side blinker/red tail specification) and the tribar light have been added to make it more sophisticated than ever.
Divis original “Bagger Rear Fender” is a bolt-on fender, so there is no need to modify your stock rear fender.
The Divise Original Bagger Rear Fender is made of special material honeycomb structure core mat laminated between glass fiber to increase the strength.
The fender mounting holes are made of 0.6mm / 4cm square steel plate to strengthen the mounting area.
Divis original bagger rear fender is not only for style, but also for the quality of the fender.
Features of the Divis Bagger Rear Fender
You don’t need to modify your stock rear fender because it is a replacement type rear fender.
Bolt-on fenders that require no modification
Tandem is OK because of the special structure for strength!
Stock seats can be installed!
Device original product.
