Material: Made of FRP
Specifications: Black gel finish (bare metal), unpainted
Applicable exhaust: Stock / 3.5inch round muffler,S&S Muffler
**There may be changes in product specifications due to the manufacturer’s reasons.
*Some Ultra seats may require a little shaving on the back.
*Compatible muffler:Mufflers other than the stock/3.5″ round muffler and S&S muffler will require modification to the fender side muffler clearance.
*Wiring modification is required to install the tail lamp and license plate light.
*By using the harness kit (sold separately), it can be installed by coupler-in.
*Road Equalizer III is required depending on the year and vehicle.(This is necessary when the genuine blinker is a bulb type.)
*This product is made of FRP.This is an unpainted product with a black gel finish (bare metal).
*Please make sure to check the installation on the vehicle before painting.Check the installation by tightening the bolts and nuts.
*It is recommended to use a professional painter who is knowledgeable about painting.We do not accept returns or exchanges after painting or processing.
*For the convenience of production, a split type mold is used, and burrs may appear on the side of the mold.Please prepare the surface before painting.
*Custom parts are mainly focused on improving the appearance.Please install the product at your own risk with the understanding that it may reduce the original performance of the vehicle.
*In developing and commercializing our products, we have conducted installation and driving tests, but there is a possibility that problems may occur even when the products are installed in vehicles that are considered to be compatible.
*In no event shall any claim be made due to installation.
*Please explain the above characteristics of custom parts to your customers before recommending them to us.en.
Bagger rear fender 09-13 touring models narrow tail for stock/3.5″ round muffler
Divis original “Bagger Rear Fender” is a bolt-on fender, so there is no need to modify your stock rear fender.
The Divise Original Bagger Rear Fender is made of special material honeycomb structure core mat laminated with glass fiber to increase the strength of the fender.
The fender mounting holes are made of 0.6mm / 4cm square steel plate to strengthen the mounting area.
Divise Original Bagger Rear Fender is not only for style, but also for quality.
The CC bar or the detachable for the tour pack can be installed by processing the hardware relief along the postcard line in advance.
There is no need to modify the genuine rear fender because it is a replacement type rear fender.
Bolt-on fenders that require no modification
Tandem is OK because of the special structure for strength!
Stock seats can be installed!
The standard type tail lamp has red lens on the whole surface and blinker flashes at the bottom 7cm.
Device original product.
