[Material]
Cowl material: FRP Multi-layered Structure
Back side of the cowl: Surface Matte Finish
Painting: Acrylic Urethane (Compatible with Japanese stock colors)
Windshield mounting structure: Stainless steel screw + polycarbonate washer + lock nut

[Size]
Total height: 430mm
Total width: 377mm
Depth: 230mm
Weight: 1100g (*Weight varies depending on models and specifications)

**This may interfere with the master cylinder depending on the handlebar angle and shape.
*Unpainted products have a black gel coat finish.

*Use of bikini cowl with “unpainted (black gel coat)
Because this product is designed to be painted, the surface of the product will still have fine scratches and other marks that have been reversed from the production model.
These scratches are usually smoothed out during the surface preparation process before painting.
If you paint by yourself, please make sure to prepare the base before painting.

However, CHIC DESIGN does not recommend the use of this product in an unpainted state.
We have made it so you can choose it in case you want to paint it by yourself, or you want to paint it in your original color at a shop..

* The image is only for reference. The image shown may differ from the actual product.

Bikini cowl with simple and classic shape.
It has both soft shape and sharp edge, and adds a traditional taste and a good old-fashioned sports mind.
It is compatible with each stock color paint, and you can get the high rectification effect and fearless styling.
It has the cut line to match V7II RACER and can be installed on the stock light by bolt-on.
Three rubber mounts on the left, right and bottom of the light ensure secure fixation.
The cowl body is made of multi-layered FRP with a matte finish on the back surface.
Polycarbonate windshield as standard equipment.

Road Comet Classic

Bikini cowl with simple and classic shape.
It has both soft shape and sharp edge, and adds a traditional taste and a good old-fashioned sports mind.
It reduces the burden of the rider when touring, while maintaining the vintage atmosphere of the vehicle.

The cowl body is made of multi-layered FRP for durability, with a matte finish on the back surface.Compatible with Japanese stock color coating with acrylic urethane paint.The windshield can be selected from clear or smoke and stainless steel screws, polycarbonate washers and lock nuts are used to attach the windshield to the cowl body.

Bolt-on installation can be done due to the exclusive design of the model
Cut line and installation bracket are set for each model, and installation is bolt-on.
No special tools are required for installation.

Secure fixation by 3-point mount
Rubber mounts on both sides and rigid mounts on the lower part of the vehicle prevent uncomfortable vibrations and provide a stable ride even at high speeds.
All the stock colors are painted clear and the back side is also painted with the same color.

Regarding the use of “unpainted (black gel coat)” bikini cowl,
Because this product is designed to be painted, the surface of the product will still have fine scratches and other marks that have been reversed from the production model.
These scratches are usually smoothed out during the surface preparation process before painting.
If you paint by yourself, please make sure to prepare the base before painting.
However, Chic Design does not recommend the use of this product in an unpainted state.
We have made it so you can choose it in case you want to paint it by yourself, or you want to paint it in your original color at a shop.

If you have a Road Cometfor which you are not sure of the application on the type of vehicle
Adaptation of Road Comet to each model is done by changing the cut line and metal fittings of the cowl body.
There is no significant difference in appearance between the two types of vehicles, but it is very dangerous to install the product on other types of vehicles as it may cause unexpected problems.