[Set components]
Machined aluminum seat lock cylinder
Resin roller
*
.
Add the availability for GPZ900R to the popular aluminum seat lock Plus!
This part is almost always the reason why the seat does not open and close properly.
The cylinder in the seat lock is made of resin, and an iron arm moves this resin to open and close the lock, so after many years of use, the corner of the cylinder will decrease and it will become difficult to open and close the lock.
Especially, if the seat is warped by the seat processing or the lock position is slightly changed when the seat is changed to the aftermarket one, the force will be applied more than when the stock one is used, and the corner of this resin will be damaged.
So this part is made out of machined aluminum!
Furthermore, the problem around the seat is the white plastic part.
Because the stock one is a plug-in type, the corner of this part is worn out, and there is a vehicle that is about to come off or has come off.
To solve this problem, the roller type that does not come off!
If you are worried about the opening and closing of the seat, why don’t you replace it before it stops opening?
